Bikecharge Installation And Review

I was recently riding my bicycle, listening to Howard Stern and using my speedo to track how slowly I was moving, and I saw this.

Now, the last thing I want to see is that I have a low battery, because it means no tunes and no tracking for the rest of the ride. (It also means that Mrs. The Plano Cyclist can't call me and ask when I will be home, so it's a bit of a mixed bag.) When I saw the notification, I mentally kicked myself, because I had a dynamo system sitting on my workbench, waiting to be installed on the bloggipede.

Even though it was waiting patiently, it took another incident to get me to install the Bikecharge. I had received a notice about a recall on my Light and Motion 180 for a circuit board problem; the light I had was in a batch that had problems with the light turning off unexpectedly. "Pshaw", I said, "this is a great light, and I don't think it will be a problem." And it wasn't - until one night at about 6:45. Once you are used to having plenty of light, it is hard to adjust to having none. I usually carry a blinky in my bag, but on the night the lights went out in Plano I didn't have it with me, of course. It was a dark ride home, and the whole time I was thinking about that Bikecharge dynamo, just sitting on the PC workbench.


Having been given two reasons to install the Bikecharge, I went ahead and did it. I had been avoiding installing the unit because I read the instructions, and I had to replace one of the hub nuts with an included narrower nut. That may sound funny from a guy who has no problem stretching a frame, but hubs are my one stopper. Despite having plenty of tools and abilities, I hate dealing with them. It is a weird hang up I have, and one that I suspect is actually slowing down the tandem rebuild.

Despite having to deal with my irrational hub mental block, the install was a snap - remove the wheel, replace the outer nut with the thinner nut (simple) and then put your wheel back on. I use a nutted front hub on the bloggipede, so once it was tightened, I did some adjusting and got everything pointed the right way. Install took all of ten minutes, and I wish I had scheduled the staff photographer that day, because it was impossible for me to do it and take photos at the same time.

Remote on/off switch

Once the unit was installed, I connected the remote "on" switch and strung it up to the handlebars. This part took longer than the actual generator installation, to be honest.

USB Plug

After that, I installed the USB cable, strung it up, and was done. The Bikecharge comes with little clips to facilitate the stringing of the wires, and I have no worries that the wires are going anywhere.

After the installation, it was time to test this baby out. The wide silver part gathers up the generated energy via the little tab shown below. Here it is engaged.

And disengaged - there is a slider so that when you don't need juice/don't want the drag on your wheel, you can reverse the tab and disengage the generator. I'm sure some of your ears perked up when I said "drag", so I will address it directly.

Yes, there is some drag. I haven't got a way to measure, but there is a perceptible amount of drag on the front wheel with this system. I have an older bike with a bottle type generator light system, and I will say that it drags much more than the Bikecharge. I don't know how the Bikecharge drag compares to a generator hub, because I don't have one. It doesn't matter, because to make an omelet you have to break a few eggs. You can't generate power without some drag.

Rear of unit, with taillight and usb and control wires. 

And does this thing generate power! I am impressed by the amount of light that it puts out. I have been spoiled by the Urban 180 light output; I would say that the Bikecharge puts out almost as much. It's certainly brighter than every other light I have tried, and a ton brighter than the bottle generator light. One of the nicer features of the Bikecharge is that it stores a small amount of energy, so that when you are stopped the light stays on. That way I don't suddenly disappear when I stop moving. The USB charge feature works very well, and I was able to recharge my half full iPhone on an hour ride, while still using the Bikebrain app and listening to Harry Nilsson.

The Bikecharge is $99, and a great investment for a commuter. Pair it with a phone mount on your handlebars, and you are all set to enjoy the day on two wheels from dawn until dusk.

***
All of the above was written when I originally installed the light in February - and I have ridden in extensively since then. Sadly, the tiny little screws in the engagement tab worked themselves out after a few rides, rendering the Bikecharge useless. I have contacted the company to see if they can send me replacement screws, so I can continue to test it. I'm sure they will, and I assume that my unit was an outlier. I will let you all know what kind of response I get from the company.

Frankly, I've Been Putting This Off For A While

I know I said that I was taking some time off in February to write some "posts" for this "blog", but then real life intruded and I became busy; we moved office space, we hired someone else, and I just got flat out too busy. That's not an excuse, because I hate excuses. Rather, it's just me being honest with you all, and asking you to forgive me. I really should have looked back on the past few years of log posts and noticed that I do have a pretty big production drop off in the beginning of the year, when things start to pick up at work. Remember, I do have a real job, and the piper must be paid. It can't all be cotton candy and vintage bicycles.

If you are curious about what it is I have been doing, you can feel free to read some of my "work" blogs HERE, HERE, and HERE. Oddly enough, in my work life I cater to automobile fetishists, but in my real life I could care less about most cars. Unless they are trying to squash me, in which case I care a great deal.

I'm not going to come back here and make great pronouncements about how many posts I'm going to do, and what about. Instead I am going to tell you where today finds me. When we left off, I said I was going to be losing weight and weighing myself on the regular. That was a lie (though I didn't know it at the time), and as most people do, I lost the weight loss momentum about the time I stopped writing new stuff back in February. I am about the same weight as when I stopped, but I am not the same shape. If you remember, the desire for weight loss was brought on my the purchase of a bunch of pants that were just a little too small for me - but I am wearing a pair now, as I type this. I have been working out, and I have been riding, but I haven't kept track of eating. I will make this pronouncement; I will not bother you with my weight loss goals again. If you want to see that, go to my friend Jared's blog, The Chili's Diet. He is busy with an interesting undertaking, and his blog is worth a perusal.

I do have a couple of things coming up; I had some products that I was sent for review that never got published. I do owe them a few articles, and I'm writing them now. I have also acquired an incredible bike in a trade with Hubbard, and that is going to prompt an article about it, as well as what three of the bikes I have represent. It might be the most interesting article this year, or it might be an incredible bust; with me you never know.

Look for some stuff here over the next few weeks as I begin to fill my funnel again. I had a habit of early morning writing, but I fell out of it, especially since it had become real work having to write product reviews.
I am early morning writing again, and that should bring something in here sooner rather than later.

Thanks for reading (and presumably coming back), and if you enjoy this, you can again look forward to being entertained(?) by my writing again. In the meantime, keep the rubber side down, and your eyes on the horizon.

Getting There

Soon.